|
|
|
 | |  | | | 2 metre length gutter (ogee)
|  | |
Description: Beautifully crafted moulded ogee gutter length.
Price is for a 2 metre length. Stopend outlet and bracket not included, see further down page for these items
|
| |  | |  |
|
| | | | | Fascia Bracket (ogee)
|  | |
Description: Fix these brackets at 700mm centres
|
| | | | |
|
| | | | | 90 Deg External Gutter Angle (ogee)
|  | |
Description: to Change gutter direction
|
| | | | |
|
| | | | | 90 Deg Internal Gutter Angle (ogee)
|  | |
Description: To change gutter direction
|
| | | | |
|
| | | | | 135 Deg External Gutter Angle (ogee)
|  | |
Description: To change gutter direction.
|
| | | | |
|
| | | | | 135 Deg Internal Gutter Angle (ogee)
|  | |
Description: To change gutter direction
|
| | | | |
|
| | | | | Running Outlet (ogee)
|  | |
Description: To connect gutter to either 68mm round downpipe or 65mm square downpipe
|
| | | | |
|
| | | | | Right Hand Stop End (ogee)
|  | |
Description: To cap off end of gutter
|
| | | | |
|
| | | | | Left Hand Stop End (ogee)
|  | |
Description: To cap off end of gutter
|
| | | | |
|
| | | | | Gutter Union (ogee)
|  | |
Description: For connecting two straight lengths of gutter together
|
| | | | |
|
| | | | | Right Hand Stopend Outlet (ogee)
|  | |
Description: For connection to either 68mm round or 65mm square pipe
|
| | | | |
|
| | | | | Left Hand Stopend Outlet (ogee)
|  | |
Description: For connection to either 68mm round or 65mm square pipe
|
| | | | |
|
| | | | | 150 Deg External Gutter Angle (ogee)
|  | |
Description: for change of gutter direction (only external angles available in 150 deg)
|
| | | | |
|
| | | | | Rise & Fall Bracket
|  | |
Description: Galvanised bracket with spike for fixing into brickwork. Will adjust up and down using the screw thread
|
| | | | |
|
| | | | | Top Fixing Rafter Bracket
|  | |
Description: Galvanised flat bracket for fixing on top of the rafter. You will need to order one standard fascia bracket for each rafter bracket. The fascia bracket should be fixed to the galvanised bracket using the threaded screw. Can be adjusted up and down
|
| | | | |
|
| | | | | Side Fixing Rafter Bracket
|  | |
Description: Galvanised side bracket for fixing on side of rafter. You will need to order one standard fascia bracket for each rafter bracket. The fascia bracket should be fixed to the galvanised bracket using the threaded screw. Can be adjusted up and down
|
| | | | |
|
|
 |
| |
| | | | | 150ml Silicone Spray
|  | £3.60
£4.23 Inc VAT.
|
Description: Lubricating silicone used for spraying onto rubber gasket gutter joints to ease expansion movement
|
| | | | |
|
| | | | | 1.25 x 10 Screws (200)
|  | £4.20
£4.94 Inc VAT.
|
Description: 1.25" x 10 Pozi Flat Countersunk yellow plate screws ideally suited for fitting gutters and pipes. Longer screws are abvailable in the 'fixings' section
|
| | | | |
|
| | | | | Dynagrip Pozidrive Driver
|  | £7.80
£9.17 Inc VAT.
|
Description: Designed for use with our 1.25 x 10 screws. Long shaft for easy use.
|
| | | | |
|
| | | | | 22 inch Upvc Saw
|  | £8.34
£9.80 Inc VAT.
|
Description: Handsaw designed for cutting upvc fascias, gutters and downpipes
|
| | | | |
|
| | | | | Gutter Mate
|  | £9.70
£11.40 Inc VAT.
|
Description: This handy tool will make things a lot easier and safer for straight cutting of gutters and downpipes. Will accept standard round, square, polyflow, sovereign, crescent and corniche gutters along with all pipes up to 110mm. Device needs to be screwed to a workmate/bench to ensure straight and even cuts to gutters & pipes. Saw not included.
|
| | | | |
|
| | | | | Measuring Tape
|  | £3.78
£4.44 Inc VAT.
|
Description: 5 metre lockable measuring tape which is ideal for the many jobs associated with fitting fascias, soffits and gutters
|
| | | | |
|
| | | | | Standard Spirit Level
|  | £14.50
£17.04 Inc VAT.
|
Description: 1200mm spirit level used for aligning fascias, gutters and downpipes. Don't try fitting pipes and gutters without this item, you will waste a lot of material and time
|
| | | | |
|
| | | | | Pistol Grip Hacksaw
|  | £7.90
£9.28 Inc VAT.
|
Description: Used mainly for precision cutting of angle and edging trims. Also used for cutting aluminium and upvc downpipe and gutters
|
| | | | |
|
| | | | | Wrecking Bar
|  | £8.30
£9.75 Inc VAT.
|
Description: Used for Removing those old timber fascias and cast iron gutters & pipes.
|
| | | | |
|
| | | | | Chalk Line Kit
|  | £4.50
£5.29 Inc VAT.
|
Description: This item used for plumbing a straight line for on masonry for fixing pipes or chalk lining a 'fall' line for fixing guttering. Cheaper than buying a spirit level but may require two people to use.
|
| | | | |
|
| | | | | 14 inch Fine Tooth Upvc Saw
|  | £6.49
£7.63 Inc VAT.
|
Description: Provides a neater cut on smaller items
|
| | | | |
| | |
|
| |
|
|
|
|
