|
|
|
 | |  | | | 1.8 Metre x 68mm Downpipe (eared)
|  | |
Description: 1.8 metre section of downpipe with matt texture like finish to match sand casted cast iron. comes with built in socket, simply screw to the wall
Outer diameter of plain end = 68mm
Inner diameter of socket = 70mm
|
| |  | |  |
|
| | | | | Loose Socket (eared)
|  | |
Description: If you have some offcuts of pipe these can come in useful to save wasteage
|
| | | | |
|
| | | | | Downpipe Clip
|  | |
Description: Just in case you need an additional fixing, this clip has built in ears to match the downpipe
|
| | | | |
|
| | | | | Loose Socket (no ears)
|  | |
Description: Straight forward connector but without the fixing points
|
| | | | |
|
| | | | | Shoe (eared)
|  | |
Description: Fitted to bottom of pipe to discharge rainwater away from wall
|
| | | | |
|
| | | | | 75mm Swanneck Bend
|  | |
Description: Smallest of the swanneck bends
Outer diameter of plain end = 68mm
Inner diameter of socket = 70mm
|
| | | | |
|
| | | | | 115mm Swanneck Bend
|  | |
Description: Outer diameter of plain end = 68mm
Inner diameter of socket = 70mm
|
| | | | |
|
| | | | | 150mm Swanneck Bend
|  | |
Description: Outer diameter of plain end = 68mm
Inner diameter of socket = 70mm
|
| | | | |
|
| | | | | 230mm Swanneck Bend
|  | |
Description: Outer diameter of plain end = 68mm
Inner diameter of socket = 70mm
|
| | | | |
|
| | | | | 305mm Swanneck Bend
|  | |
Description: Outer diameter of plain end = 68mm
Inner diameter of socket = 70mm
|
| | | | |
|
| | | | | 380mm Swanneck Bend
|  | |
Description: Outer diameter of plain end = 68mm
Inner diameter of socket = 70mm
|
| | | | |
|
| | | | | 455mm Swanneck Bend
|  | |
Description: Largest of the swanneck bends. Used for large soffit overhangs
Outer diameter of plain end = 68mm
Inner diameter of socket = 70mm
|
| | | | |
|
| | | | | 112 Deg Left Hand Spigot Bend (eared)
|  | |
Description: Sideways angle with spigot enabling it to be inserted into a cut end of pipe (a bit of jiggery pokery may be required!)
|
| | | | |
|
| | | | | 112 Deg Right Hand Spigot Bend (eared)
|  | |
Description: Sideways angle with spigot enabling it to be inserted into a cut end of pipe (a bit of jiggery pokery may be required!)
|
| | | | |
|
| | | | | 112 Deg Spigot Bend (reversible)
|  | |
Description: Same as the previous two but without the fixing ears thus making it reversible
|
| | | | |
|
| | | | | 90 Deg Bend
|  | |
Description: Standard socket/spigot bend
Outer diameter of plain end = 68mm
Inner diameter of socket = 70mm
|
| | | | |
|
| | | | | 135 Deg Bend
|  | |
Description: Standard socket/spigot bend
Outer diameter of plain end = 68mm
Inner diameter of socket = 70mm
|
| | | | |
|
| | | | | Branch
|  | |
Description: 135 deg branch
Outer diameter of plain end = 68mm
Inner diameter of socket = 70mm
|
| | | | |
|
| | | | | 50mm Plinth Projection with ears
|  | |
Description: Handy little item for projecting over plinths or ledges
|
| | | | |
| | |
|
 |
| |
| | | | | Fixings for Cast Lookalike round & Square Pipe
|  | £5.10
£5.99 Inc VAT.
|
Description: Pack of 10 fixings at 55mm, each one comprising plug, screw and black metal/rubber cap for colour coded fixing of the imitation cast iron effect downpipe system. Also ideal for all associated hopper heads in this range
|
| | | | |
|
| | | | | Dynagrip Pozidrive Driver
|  | £7.80
£9.17 Inc VAT.
|
Description: Designed for use with our 1.25 x 10 screws. Long shaft for easy use.
|
| | | | |
|
| | | | | Gutter Mate
|  | £9.70
£11.40 Inc VAT.
|
Description: This handy tool will make things a lot easier and safer for straight cutting of gutters and downpipes. Will accept standard round, square, polyflow, sovereign, crescent and corniche gutters along with all pipes up to 110mm. Device needs to be screwed to a workmate/bench to ensure straight and even cuts to gutters & pipes. Saw not included.
|
| | | | |
|
| | | | | Pistol Grip Hacksaw
|  | £7.90
£9.28 Inc VAT.
|
Description: Used mainly for precision cutting of angle and edging trims. Also used for cutting aluminium and upvc downpipe and gutters
|
| | | | |
|
| | | | | Standard Spirit Level
|  | £14.50
£17.04 Inc VAT.
|
Description: 1200mm spirit level used for aligning fascias, gutters and downpipes. Don't try fitting pipes and gutters without this item, you will waste a lot of material and time
|
| | | | |
|
| | | | | Measuring Tape
|  | £3.78
£4.44 Inc VAT.
|
Description: 5 metre lockable measuring tape which is ideal for the many jobs associated with fitting fascias, soffits and gutters
|
| | | | |
|
| | | | | Chalk Line Kit
|  | £4.50
£5.29 Inc VAT.
|
Description: This item used for plumbing a straight line for on masonry for fixing pipes or chalk lining a 'fall' line for fixing guttering. Cheaper than buying a spirit level but may require two people to use.
|
| | | | |
|
| | | | | 5mm Spacers for Downpipe (pack 10)
|  | £3.80
£4.47 Inc VAT.
|
Description: These 5mm spacers are ideal for standing the pipe off the wall to avoid wall obstructions. They can be doubled or even tripled up to get over minor obstacles whilst keeping the pipe straight.
|
| | | | |
|
|
| |
|
|
|
|
