Sales Hotline (Press Option 2 then 1) 020 8644 8143 Lines open 09.00 - 13.00/14.00 - 16.30 (Mon - Fri)
Ring seal fitting used for joining fittings and pipes. You will also need to use solvent weld (see further down…
This fitting has a single socket fitted with a ring seal. The other end will to fit into another socket…
Used to change pipe direction.This fitting has a single socket fitted with a ring seal. The other end will to…
This fitting comes with 3 boss shoulders to connect 32,40 or 50mm waste pipes.Requires boss adaptors (see adaptors and reducers…
Back fix nut & bolt strap boss. Used to connect 32,40 or 50mm waste pipes to existing UPVC soil pipe.…
Side fix clip strap boss. Used to connect 32,40 or 50mm waste pipes to existing UPVC soil pipe. Requires boss…
Use this to make sure your pipe set up is watertight. Simply fit into the end of your pipe and…
Used to join branch pipe to vertical pipe at an angle of 104 deg. This fitting has two ringseal sockets…
Used to join branch pipe to vertical pipe at an angle of 112 deg. This fitting has two ringseal sockets…
Used to join branch pipe to vertical pipe at an angle of 92.5 deg and comes with 4 boss shoulders…
Used to join double branch pipes to vertical pipe at an angle of 92.5 deg. This fitting has three ringseal…
Used to join double branch pipes to vertical pipe at an angle of 112 deg. This fitting has three ringseal…
This fitting comes with 3 boss shoulders to connect 32,40 or 50mm waste pipe.Requires boss adaptors (see above) It has…
Used to join branch pipe to vertical pipe at an angle of 112 deg.It also has screwed access cap for…
Spigot Tail Access Plug. This can be fitted to any ring seal socket to allow for pipe cleaning or inspection.
Socket tail access cap. This can be solvent welded to any plain length of pipe to allow for pipe cleaning…
For use with both the galvanised and metal coated pipe clips that do not have a backplate. Click on 'More…
Push fit rubber adaptor to allow boss shoulders, strap boss or wastepipe adaptors to recieve 32mm waste pipe.
Push fit rubber adaptor to allow boss shoulders, strap boss and wastepipe adaptors to recieve 40mm waste pipe.
This fitting is a reducer to waste which will fit into a socketed fitting. It requires a boss adaptor(see above)…
This will connect an 82mm pipe to a 110mm pipe. The 82mm part will fit onto a plain 82mm pipe…
The 68mm part is a socket, meaning that the 68mm pipe will fit inside. The 110mm part is a spigot,…
Designed to fit a soil stack in the corner of a room. Allows connections to 32mm, 40mm and 50mm waste…
This fitting connects all types and sizes of waste pipe to 110mm underground drainage. Simply use a saw or trimming knife…